RE: Exhaust Studs/Nuts

["Westerlund, Ken" <kwesterlund@xxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Click here and walk away with your free Chevy collectible.
caacDvMb7yoMza/PermissionData
-------------------------------------------------------------------

I just bought some long ones from the local dodge dealer.  ...probably
cheaper than YO.
Regards,
Ken

-----Original Message-----
From: Brian Schlump [mailto:jsbs@xxxxxxxxxxxxx] 
Sent: Friday, September 17, 2004 7:55 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: Exhaust Studs


Yes Scott.  It's called a sleeve nut and it's available from Year One, 
and The Paddock.  There are 2 lengths available and they fit the later 
model B body manifolds as well.  Measure the depth of the hole in the 
manifold to the point where there is a flat ledge inside, then order the

correct length, either 1-7/8" or 2-7/8"....Brian

Scott Ostrowsky wrote:
> 
>  I have a releated questions. I am using factory max wedge headers on
my
> engine. Is there a sprecial bolt you use for the one that is recessed 
> and
> kind of goes through the manifold?
> 
> Scott

[AD removed for archives]
-------------------------------------------------------------------
Should School Prayer be mandatory? Give us your opinion and win.
caacDvTb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.