RE: Cutting hood specs

[Brent Stewart <prebee65@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
RE-GROW YOUR HAIR STARTING NOW.....Click here for more info!
caacxydb7yoMza/Medical Hair Restoration
-------------------------------------------------------------------

I beleive the mopar book says the holes need to be a min of 2 - 5" circles 
for enough air flow to do what you want, again i believe that is Minimum, so 
if 5" is good 6" must be better.... I believe the holes line up withthe 
carbs on the X-ram. In my mind the bigger the better, cut out as much as 
possable under the scoop, usually the triangular space between the hood 
braces... the new 65 coronet model i have has 2 holes that line up over the 
carbs.


> From: "Gary H." <62to65mopar@xxxxxxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Cutting hood specs
> Date: Thu, 19 Aug 2004 05:10:05 +0000
>
> [AD removed for archives]
> -------------------------------------------------------------------
> RE-GROW YOUR HAIR STARTING NOW.....Click here for more info!
> caacxydbWhUHTa/Medical Hair Restoration
> -------------------------------------------------------------------
>
> Does anyone have the answers to the questions below? I received an
> e-mail from a fellow and am trying to help him out.
>
> Reply here, as these are good questions. :)
>
> Thanks,
> Gary H.
>
> QUESTIONS:
> "I am building a 1965 Belvedere I to A990 specs, and must cut the hood
> for the x-ram manifold.
> I need to know:
> 1. What is the diameter of the hole?
> 2. What is the location of the center point?"
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Sponsor a child today through Children International.
> Give a desperately poor child hope for a brighter future.
> For only $18 a month you can make a difference!
> caacvgobWhUHTf/ChildrenInternational
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

_________________________________________________________________
Is your PC infected? Get a FREE online computer virus scan from McAfee® 
Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

[AD removed for archives]
-------------------------------------------------------------------
Stories from the Civil Rights Movement. Extraordinary stories, 
ordinary people. Share your memories today!
caacvglb7yoMzf/AARP
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.