Re: Front end and reverse probs

[Thomas R Hansen <trandco1@xxxxxxxx>]

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7yoMza/TopOffers
==========================================================
> After a few set backs, i.e. wrong cam shaft installed in the poly 
> 318, the 
> car has been fired up and runs; however, the car runs in reverse 
> when the 
> pushbutton shows neutral.   Any suggestions on problem 
> number 
> 1?
> 
> Problem number 2 - both front wheels point out slightly to the 
> right.    Nothing looks out of 
> place, 
> broken, or cracked underneath.  
> Buck
> '62 Savoy
Buck,  #1, the cable to the trans, that selects which gear your in, needs
adjusting. in or out by a couple turns, I don't remember which direction,
but does need moved.
 #2, Even bent frames aren't a problem, if the car takes an alignment.
Manufacturers make all the drilled holes slotted for a reason, because
things don't always fit right the first time!  Take the car down for an
alignment, and if there are things wrong, the "rack" guy will tell you
most all of them!  Go from there.  Tom in Dallas


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.