Re: 318 Poly windage tray install problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 318 Poly windage tray install problem



==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYb7yoMza/TopOffers
==========================================================
Can't recall right now - don't have the stuff here at my place.  If I remember correctly the threaded portion (going into the block) is the same length, it's the top-end through the cap that is the problem.
 
Thanks again (and again)!
Andy

Dave Casey <dcasey@xxxxxxxxxxxxx> wrote:

When you hold a factory main bolt up to one of the studs, is there any
difference? Longer shank on the stud than the bolt? Different thread pitch?
Anything?

Dave Casey

		
---------------------------------
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.