========================================================== Extra! Extra! Read all about it! Get the latest weather, sports, and lifestyle news you can't afford to miss, all at a price you can afford to pay! Click now! caaa9eYb7yoMza/TopOffers ========================================================== To any of you 318 Poly guys that have a Milodon windage tray installed - did you encounter any problems with the studs (from the Milodon stud kit) not fitting correctly? Here's the dilemma - they thread into the #3 and 4 main bolt holes just fine. The problem is that the top of the cap is about 1/2" below where the threads for the nut stop - so there is no way to tighten down the main caps! I double and triple checked - I have the right install kit (even though it says for big block chevy on it...). This is the last thing keeping us from buttoning up the bottom end - argh! Can anyone help? I'll be calling Milodon tomorrow... Thanks, Andy --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! -- [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.