[AD removed for archives] ------------------------------------------------------------------- Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a FREE Cutlery Set + Cutting Board! caaclxSb7yoMza/OmahaSteaks ------------------------------------------------------------------- I've been told that the carbs on the Max-Wedge engine take different jetting. Even though I'm using Holley carbs on my motor I'd like to know what the difference is between carbs as far as primary and secondary jetting should be. I'm told the motor feed different from left to right. Anybody got some numbers I could go by? I have both my carbs jetted the same and noticed the drivers side plugs seem to be darker than the passenger side after running the motor, (not moving), just fast idle inside the shop. It's all guessing at this point what the motor will want, what with 493 cubes. Any help is appreciated, Bill C. 64 Sport Fury [Non-text portions of this message have been removed] ----------------------------------------------------------- Sponsor a child today through Children International. Give a desperately poor child hope for a brighter future. For only $18 a month you can make a difference! caaciqSb7yoMzf/Children's Int'l ----------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.