Re: storing t-bars

[Dave Casey <dcasey@xxxxxxxxxxxxx>]

-----------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today ? APPLY NOW! It's fast, easy and 
secure. 
caaciqQb7yoMza/Discover Card
-----------------------------------------------------------

If there's a left and a right, then there has to be a front and rear. If one
doesn't matter, the other shouldn't either, right?

Dave Casey

----- Original Message ----- 
From: "Bill Watson" <wwatson5@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, June 17, 2004 1:56 PM
Subject: Re: storing t-bars


> -----------------------------------------------------------
> Give Your Team Access to Their PCs from Anywhere. Increase
> productivity with a secure remote-access solution from
> GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
> caaciqXbUYx2xa/ExpertCity
> -----------------------------------------------------------
>
>
> There is no front or back for a torsion bar.  It will fit in either
> direction.
>
> They are in pairs, though, with a left and right.   The last three digits
of
> the part number are stamped on the end on the bar.   Right bars are even
> numbers and left bars are odd numbers, with the right bar being one digit
> less than the left.  Thus, with bars 774, 775 and 776, for example,
774-775
> are a pair while 776 belongs with a bar stamped 777.
>
> As to twisting, they get twisted in both directions installed on the car.
> When a car hits a bump, the bar gets twisted one way and then "untwists"
on
> the rebound.  When you go through a pothole, the bar twists the other way
> and then "untwists".
>
> Bill
> Vancouver, BC
>
>
>
> ----- Original Message ----- 
> From: "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, June 17, 2004 6:40 AM
> Subject: storing t-bars
>
>
>
>  Two questions:
>     1) Should T-bars be stored flat?? Probably , eh?? Not standing up in
>     a corner, or would it matter?
>     2) Should they not be mixed up, or does it matter? That is, should
>     it be noted how they came from the car? is there a left and right or
>     front and back? Would it actualy be good to rotate them anyway,to
>     twist em the other direction?I havent actually pulled them out the
>     back of the crossmember yet and wanted to chek with u guys before I
>     did.
>     Sorry, I guess that is actually seven questions.
>    Neal ZImmerman, Eugene Oregon
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
> FREE Cutlery Set + Cutting Board!
> caaclxSbUYx2xf/OmahaSteaks
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>

-----------------------------------------------------------
Empower your Team with Remote Access. GoToMyPC Pro 
provides your organization with instant remote access to 
email,files, applications and network resources in real 
time. FREE TRIAL:
caaciqTb7yoMzf/ExpertCity
-----------------------------------------------------------


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.