----------------------------------------------------------- Let University of Phoenix make 2004 your year. Evening, weekend or FlexNet® classes ? over 130 locations. Look into our programs and get the degree that gets you going! caaciq1b7yoMza/UOP ----------------------------------------------------------- In a message dated 6/3/2004 1:53:23 PM Eastern Standard Time, kwesterlund@xxxxxxxxxx writes: Help! I am putting my 440 back together and the FelPro gasket set I have doesn't include the gasket for the oil pump. The auto parts stores around here are worthless when it comes to finding this gasket (what ever happened to the good old auto parts stores). Can the pump be installed without a gasket using RTV or where can I get the gasket? Does anyone have a part number for it? If so, they can probably order it. Thanks in advance, Ken Ken I would recomend that you DO NOT use RTV. That stuff has a nasty habbit of squeezing into the pan or oil gallery and plugging up the works. You can call Fel Pro and ask about a part number. What I have done in the past is make my own. You can get a sheet/roll of thin gasket material. Lay the pump on top of the material and trace the outline of the pump.You have to have a center hole for the oil pump shaft in the gasket material. When you have it cut out the flip the pump over lay the gasket back on the pump again and push your finger in the holes for the bolts and oil inlet/outlet. This will leave an impression in the gasket. Take the gasket lay it on a hard surface (steel is best) take a 1/4 drive socket (somewhere around 5/16 in size) line it up over the indentations and hit the socket with a small hammer with a couple of sharp blows. This will cut out a perfect circle for the holes needed. You just have to figure out which socket size is the right size for the hole. I have done this for all types of bolt ons and it works quite well in a pinch. Bob [Non-text portions of this message have been removed] ----------------------------------------------------------- Apply now for a No-Annual-Fee Discover® Platinum Card 0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® award* Start Saving Today ? APPLY NOW! It's fast, easy and secure. caaciqQb7yoMzf/Discover Card ----------------------------------------------------------- ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.