Re: idler pulley needed

[Schuyler Wrobel <schuyler62@xxxxxxxxxxxxx>]

-----------------------------------------------------------
Sponsor a child today through Children International.  
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
caaciqSb7yoMza/Children's Int'l
-----------------------------------------------------------

same thing happened to me , I used one from a f#rd  that was lay'n 
around and it works fine and
 now-one has noticed. Point is there's probably something in a friends 
or neighbors garage you could use.
just a thought,
Schuyler

On Wednesday, June 2, 2004, at 07:22  PM, laborboy@xxxxxxxxxx wrote
> Me again. Finishing my rebuild: '64 383 with air. Noticed my idler
> pulley is balky (probably bad bearings). Are there shops that will redo
> these bearings? Or, does anyone have a functioning pulley? I can post 
> or
> send a picture if needed.
>
> Thanks, Zack
>
> (I'm almost done...)
Schuyler V. Wrobel
  Artist & Illustrator

-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaciq1b7yoMzf/UOP
-----------------------------------------------------------




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.