RE: AFB carb problem

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5b7yoMza/ GoDaddy
===========================================================

Walt,
Hood clearance is an issue for me because I didn't cut out the hood 
braces for additional clearance for the front air cleaner.  However, I 
did buy the special thick carb gaskets (1/4") from Kramer's, and with no 
heat crossover in the manifold, the carbs don't get very warm.
Brian
  
Walt wrote:
> 
> If have hood clearance, put a bakelite spacer under the carb, I have had
> this problem with a Holley on a 318.  It cured the problem
> 
> Walt
> 
> 



'64 Belvedere
Woodstock, IL.

===========================================================
Sponsor a child today through Children International.  
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
caaccM4b7yoMzf/ Children's Int'l
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.