RE: Aluminun head/gasket re-torque!

[Earl Helm <earlh@xxxxxxxxxxxxxx>]

===========================================================
Cancel your low-carb diet. Lose weight. Choose your own 
foods. Learn more about our program at:
caaccM7b7yoMza/ Dr. Smith
===========================================================

Bill,

Do it. It is going to be a bigger PITA to take the whole thing apart and
put
new head gaskets on it. Yes I have seen about 3 guys who did not
re-torque
their heads have a Red Green sprinkler system. I have also seen a couple
of
guys who did have the same thing. Better safe than sorry.

Earl

Is anybody running Edlebrock aluminum heads and NOT re-torqued the head 
gaskets and NOT had a problem.
My headers and valve covers with the crossram manifold are a PITA to
take off 
and put back on. I know Edlebrock recommends doing this but just
wondered if 
I can get away without doing it. 
Let me know your thoughts.

Thanks,
Bill C.
64 Sport Fury
Max-Wedge +

[Non-text portions of this message have been removed]

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5bV1hOjf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5b7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.