Re: carb selection/swap?

[lewtot184@xxxxxxx]

===========================================================
Graduate in less than 13 months with AIU?s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime ? anywhere.
caaccM2b7yoMza/ AIU
===========================================================




biggest problem i can see is that the secondary throttle blades, 500 or 
600cfm, probably won't clear the manifold. measure the secondary bores on the 
manifold. the bores need to measure at least 1 11/16".

[Non-text portions of this message have been removed]

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5b7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.