Re: Casting number issues...

[Thomas R Hansen <trandco1@xxxxxxxx>]

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6PVb7yoMza/ Val Rad
===========================================================

> 
> Andy...I have nothing on the block or heads....must be pre-1960,is 
> my guess.
> Could the intake be 1859229?.If so, its a 1957-61 C-body or 1962 
> B-body
> 318-4 barrell intake for a WCFB carb.Thats all I got.
> 
> Hope it helps....
 Any chance this may be a Canadian 313?  The car is up past the border.  
 Scalloped lower edge on valve covers, and two bolts through the valve
covers to hold down, Poly.

===========================================================
$6.95 .com Domain Name Sale! 
Limited Time! ICANN Accredited GoDaddy! 
caab7pQb7yoMzf/ GoDaddy
===========================================================

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.