Re: Trunk emblem removal

[Andrei Pasternak <swirldesign@xxxxxxxxxxx>]

Thanks for the tip!  I was able to get the emblem off, however not all 
in one piece. There was already a crack where the cross of the "F" 
broke off along time ago so the bottom of it snapped off easily.

Are mollies the little spring clips pushed through the trunk lid? If so 
is there some easy trick to remove them?

Also where can someone find a new trunk emblem? There's one on ebay 
right now but it's gonna sell for more than I want to spend.

Andrei

On Saturday, March 20, 2004, at 04:57  PM, Albinted@xxxxxxx wrote:

> hey Andrei
> mollies. have to break out the putty knife and wiggle it off. use 
> masking
> tape on the knife blade to protect the finish. you can wiggle on one 
> side and use
> some pressure on the tips to help persuade it off.
>
> [Non-text portions of this message have been removed]
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.