Re: rear springs

[vonhench <vonhench@xxxxxxx>]

I dunno. According to Mopar Chassis book they are rated at 3000lb called out
for Hemi Super Stock cars, (which I believe are the Barracuda series.
Also measure the front segment (center of front spring eye to the "center
bolt" which is not in the center (length-wise) of the spring.
If it is less than 22 inches you'll need special fron sping hangers.
VonHench
----- Original Message -----
From: "anthony narducy" <arnsr@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 17, 2004 8:07 AM
Subject: rear springs


> has anyone used the super stock springs in a 64 polara part  # p3412002
> p3412003  there was a set in the trunk when i bought the car i am planing
> on changing the rear end this weekend
>
> Tony Narducy
> 639 E Groveland Park
> Chicago Il. 60616
> arnsr@xxxxxxxxxxxxx
>
> ----
> Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>
>

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.