Frank, Sorry I can't help you with the trim, But the engine color is Chrysler Tutquoise # P4120752. You can get chrysler green #DE1619 at napa But its not the same. Way to much blue.. I tried yesterday to get the paint a my local dodge dealer and was told that there is none available in So. Jersey. I'm guessing ill have to go to P.A. Unless somebody knows someplace online that has it. Goodluck Marshall ----- Original Message ----- From: fcapretti@xxxxxxx To: 1962to1965mopars@xxxxxxxxxx Sent: Tuesday, March 16, 2004 11:53 PM Subject: 64 Polara Trim I am looking for the large piece of trim for the drivers side quarter panel. I have one on the car but the inside part that has a machine finish has a scratch and I would like to replace it with a good one. Also the car has the orginial 383 what is the correct color for the motor. Thanks Frank ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. b7yoMz.