Re: 413

[Jeff Adams <ledman_70@xxxxxxxxxxx>]

Whew! Threw my whole perspective off for a minute there. That was totally 
gonna change how I built the 426 sitting in my garage! ha ha
Jeff


> From: GARY WILSON <MOPAR413@xxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: 413
> Date: Sun, 14 Mar 2004 15:30:47 -0800
>
>
> Bore the 413 60 over and you have a 426.  Sorry I didn't make myself clear.
> MOPAR413 (Gary) 64 Polora 500
>   ----- Original Message -----
>   From: Jeff Adams<mailto:ledman_70@xxxxxxxxxxx>
>   To: 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx>
>   Sent: Sunday, March 14, 2004 3:17 PM
>   Subject: Re: 413
>
>
>
>   I thought a 413 .060 over was 426 cubes, and a 426 .060 over was 440 
> cubes.
>   How can you use 440 pistons in a .060 over 413?
>   Jeff
>
>   >From: GARY WILSON <MOPAR413@xxxxxxx<mailto:MOPAR413@xxxxxxx>>
>   >Reply-To: 
> 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx>
>   >To: 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx>
>   >Subject: Re: 413
>   >Date: Sun, 14 Mar 2004 15:13:54 -0800
>   >
>   >
>   >440 pistons stock will bring the 413 to 426.  I have a 413 also and am
>   >planning on borning it 60 over so I can use the 440 pistons.
>   >MOPAR413 (Gary) 64 Polora 500
>   >   ----- Original Message -----
>   >   From: Gary 
> Futrell<mailto:gary-futrell@xxxxxxxxxxxxx<mailto:gary-futrell@xxxxxxxxxxxxx>>
>   >   To: 
> 1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx<mailto:1962to1965mopars@xxxxxxxxxx>>
>   >   Sent: Sunday, March 14, 2004 12:56 PM
>   >   Subject: 413
>   >
>   >
>   >   I've got a rebuilt 1964 413 shortblock to install in my 64 Fury this
>   >summer. I wanted to put 452 heads on it, but after checking the piston
>   >height, I'm sure about it. I used a straight edge and feeler gage , the
>   >piston was about .085 down in the hole. Are these possible truck 
> pistons?
>   >The 413 is bored out .030. Aren't the 413 pistons hard to find?
>   >   Any recommendations on pistons?  Would 426 pistons be easier to 
> find? (
>   >block bored out .060)
>   >
>   >
>   >      Gary
>   >
>   >
>   >   --
>   >   [Non-text portions of this message have been removed]
>   >
>   >   ----
>   >   Please address private mail -- mail of interest to only one person 
> --
>   >directly to that person.  I.e., send parts/car transactions and
>   >negotiations as well as other personal messages only to the intended
>   >recipient, not to the Clubhouse public address. This practice will 
> protect
>   >your privacy, reduce the total volume of mail and fine tune the content
>   >signal to Mopar topic.  Thanks!
>   >
>   >   '62 to '65 Mopar Clubhouse Discussion Guidelines:
>   >
>   
> >http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>>.
>   >
>   >
>   >
>   >[Non-text portions of this message have been removed]
>   >
>   >----
>   >Please address private mail -- mail of interest to only one person --
>   >directly to that person.  I.e., send parts/car transactions and
>   >negotiations as well as other personal messages only to the intended
>   >recipient, not to the Clubhouse public address. This practice will 
> protect
>   >your privacy, reduce the total volume of mail and fine tune the content
>   >signal to Mopar topic.  Thanks!
>   >
>   >'62 to '65 Mopar Clubhouse Discussion Guidelines:
>   >http://www.1962to1965mopar.ornocar.org/mletiq.html.
>   >
>   >
>
>   _________________________________________________________________
>   Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1!
>   (Limited-time Offer) 
> http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/<http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/>
>
>   ----
>   Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
>   '62 to '65 Mopar Clubhouse Discussion Guidelines:
>   
> http://www.1962to1965mopar.ornocar.org/mletiq.html<http://www.1962to1965mopar.ornocar.org/mletiq.html>.
>
>
>
> [Non-text portions of this message have been removed]
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

_________________________________________________________________
Frustrated with dial-up? Lightning-fast Internet access for as low as 
$29.95/month. http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.