| Hi all, A bit off topic for this group, but was wondering if anyone here at experience with the 318 Poly and starters. Apparently there was a 3-bolt and a 2-bolt version? Are they interchangeable? My engine builder is working on a super rare 318 Poly Marine for a Italian boat project (the one that James Bond drove in Venice). The bell housing is a 2-bolt but the starter he has is a 3-bolt. The 2-bolt was apparently 6v only? Anyways, he is trying to use a newer starter because he needs 12v and the starter was reversed for the 318 Poly Marine application. The starter seems to be grinding somewhere on the flex plate or flywheel. Maybe a spacer is needed? Listening to that old direct-drive starter, the starter itself sounds ok but smells like it is under stress so I’m thinking it is binding up possibly. Thought I’d throw this out here to see if anyone has any ideas on what to look for. (BTW yes, the engine builder machine his own header adapter plate…) Thanks, Conrad   -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/74216F94-92F8-4BF2-93F2-63DEE12AE98A%40gmail.com. |
Back to the Home of the Forward Look Network