Re: Men of Mopar,, Question!

[Jimmy Peavy <peaver63@xxxxxxxxx>]

15 inch x 8 inch with 4 1/2 inch of backspacing

Jimmy

On 1/1/19, Dodge Coronet <cirenaid@xxxxxxxxx> wrote:
> Sorry the size of the Radial was 275-60/15
>
> On Tuesday, January 1, 2019 at 6:31:42 PM UTC-7, Dodge Coronet wrote:
>>
>> [image: Small.jpg]
>> Hi, 15x8 rim with a 4.5" offset is the biggest rim that will fit with a
>> tire at the rear. I have had a M&H drag radial with a 10.9" section width,
>>
>> 10" wide tread with as described before a full set of fingers fit on both
>>
>> sides, and I'm know running a 28x11.5x15LT Bias ply with a 11.2" section
>> width, and 10" tread, with more room on both sides. Also consider the fit
>>
>> to get the tire in the well, same rim, the Drag Radial was harder to get
>> up
>> in there than the Bias.
>>
>> On Tuesday, January 1, 2019 at 1:21:01 PM UTC-7, Jay Rod. wrote:
>>>
>>>  My question is,  On a stock 1965 Coronet 500, is it possible to fit/use
>>>
>>> a set of American Racing Torq-thrust D wheels/tiers size 15x10 without
>>> having to modifying the inner wheel wells, or is a 15x8 the only way to
>>> go.
>>>
>>> Thanks in advance,
>>> Jay.
>>>
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.