Re: replacing oil pan seal on '64 Sport Fury with a 383
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: replacing oil pan seal on '64 Sport Fury with a 383



Hello,

I have changed the seal a couple of times on my 63 Sport Fury with the 383 without lifting the engine.

There is room without lifting the engine but the steering link must be dropped.  I changed mine just dropping the link however I suspect lifting the engine a little would be a great help.  The reason I've done it a couple of times is that I have screwed up the installation a couple of times before getting it to stop leaking.

The only suggestion I have for changing the seal is to use a couple of bolts with the heads cut off and slotted on the end to guide the seal retainer in when installing.  I also made of some similar bolts without heads to align the pan when reinstalling.

If anyone has a foolproof rear seal kit recommendation and the procedure for installing the seal it would really be appreciated.

Dennis C.

On Monday, October 22, 2018 at 10:46:27 AM UTC-7, Douglas Sutherland wrote:
I have a leak at the top of my oil pan on the seal.

My local shops software only goes back to 1968 to estimate labor hours.

Does the engine have to be "lifted" to replace the oil pan 
gasket on a 383?

Thanks,

Doug



Sent from Outlook

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.