John,
When I putting the TTI exhaust on my car, from single to dual everything was included. All bolt up, no welding. Adding the muffler bracket to the right side did require removing the back seat to bolt through the body. Here are the muffler brackets & tail pipe brackets that came with the kit.
Nick Tiberio
Furyus63
On May 2, 2018 at 11:41 PM John Waskiewicz <jswask@xxxxxxx> wrote:
Sent from Mail for Windows 10
I have a few questions on this topic, my 64 sport fury with 361, 2 barrel and single exhaust needs a exhaust update. I bought a full TTI stock exhaust (2.5”) few years ago, so this year I'm putting it in. First question, as this is a single exhaust car, I need to add the muffler hanger bracket on the passage side that mounts to the floor. That will get welded on. Do I need to replace the stock one on the drivers side with the new one from the kit. Does the brake line bracket bolt on the new bracket. Also, at the rear tailpipe bracket that mounts to the frame, it seems like the frame is prepped with a hole and a slot, is there a clip that goes into it that the bracket bolts into as in the drivers side, if so who would carry it.Thank you John, having hard time sending pics, will retry if pics are needed. Thank you John Wask….
--
Attachment:
MH-B25HA_detail.jpg
Description: JPEG image
Attachment:
TPH-B2530.jpg
Description: JPEG image