--Thanks Bill!! This helps a bunch yes pictures would be awesome!!
jason
From: 1962to1965mopars@googlegroups.
com [mailto:1962to1965mopars@googlegroups.com ] On Behalf Of Bill M
Sent: Monday, November 27, 2017 1:47 PM
To: 62-65 Mopar List <1962to1965mopars@googlegroups.com >
Subject: Re: 65 Heater Control Valve
Jason,
I can take pics tonight if you want.
You do NOT have to take the seats out, but unless you are a young contortionist, seat removal definitely helps!
Per the FSM, you do not have to remove the console. I took mine out just to give myself a little more room.
Our setup is a bit odd. The heater control valve inserts into the heater core and creates the 2nd water line port. The weak point of the system seems to be the o-ring that goes around the heater control valve.
Once you get it out, it's really simple and straight forward. If you haven't been into it before, take LOTS of pictures just in case. I got lucky and found a complete heater box in a 63 Polara in a local u-pull-it, so I have an unmolested model to go by.
The heater core is a unique beast. Not sure who to goto these days for re-coring these units. I'm sure someone will ring on on it.
Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
14 Avenger R/T, 15 Durango R/T, 21 Model T Depot Hack
On Sun, Nov 26, 2017 at 9:00 PM, Jason Rhoades <jason@xxxxxxxxxxxxx> wrote:
Anyone have a diagrams
Mine sprung a leak. Internally. And i am curious how best to remove it. I have a coronet 500 with console. Looks like seats and consol have to come out?
Thanks
Jason Rhoades
From: 1962to1965mopars@googlegroups.
com <1962to1965mopars@googlegroups.com > on behalf of Bill M <y1topbanana73@xxxxxxxxx>
Sent: Sunday, November 26, 2017 8:42:59 PM
To: 62-65 Mopar List
Subject: Re: 65 Heater Control Valve
Yeah...we double checked hose routing. It just would not flow. Got only some minor discolored water when I flushed the core after I got it out of the car, and the valve seems clean...just sticking.
On Nov 26, 2017 8:08 PM, "Daniel Davids" <ddavids@xxxxxxxxxx> wrote:
Be sure to attach the hoses correctly when you reinstall the valve in your car, Bill.
We were ready to send our valve out for overhaul when local Mopar guru Jeff Carter advised we check the hose routing.
Sure enough, someone had hooked the heater hoses up backwards. We swapped them to the correct position and the heater core began putting out copious amounts of heat at full tilt.
On our 64 Dodge, the correct hose hookup is such that it appears the hoses cross each other. Because this can look odd to the eye when gazing at the engine compartment, it leads people into hooking them up the wrong way. That’s my theory, anyway, since I’m the one who likely made the mistake when I installed new hoses awhile back.
Dan Davids
Seattle
On Nov 26, 2017, at 2:53 PM, NICHOLAS TIBERIO <furyus63@xxxxxxxxxxx> wrote:
Bill,
Last year I rebuilt the heater in my '62 Fury. At the same time I sent my heater control valve out to be rebuilt and was very satisfied with the work.
Joe Hudacek, 715-392-6169, the cost was about $90. for the rebuild & postage. One day turn around and he paid the return postage. The valve came back like new. The only negative thing was the new O-ring provided was the right ID but too large OD. I picked up an assorted O-ring package at Auto Zone for a few bucks and the right one was there.
Nick Tiberio
FuryUs63
On November 26, 2017 at 2:59 PM Bill M <y1topbanana73@xxxxxxxxx> wrote:
So I think I finally determined is that my problem with no heat was due to a sticking heater control valve. When I took it out of the car, I noticed it would just lock in a closed position for an indeterminate length of time and then pop open.
I have two other heater control valves that seem to operate fine, but when they're in the closed position, they seem to leak just a little tiny bit when I blow on the valve.
I'm trying to decide if this bit of blow by would be acceptable, or should I try and Source in new rebuilt one? Unfortunately a rebuilt one would be pricey.
Thoughts?
Bill M
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_ .disclaimer.html
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en .
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com .
For more options, visit https://groups.google.com/d/optout .
Back to the Home of the Forward Look Network