Re: vechicle I D tag
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: vechicle I D tag



There is some disagreement here. The argument is that the pre-66 VIN holes were used to align the tag but the tag itself was held on by some type of adhesive, not welded on. 

Gary H. 

>  -------Original Message-------
>  From: Herb McCurdy  
>  The holes were from the welding
>  
>  _-------Original Message-------_
>  
>  _FROM:_ Dodger 
>  
>  Cool,,,,,,,,,,man asks about the ID tag, and gets 16 responses on the
>  correct name for the package shelf,,,,,,,,,as to the ID tag none of
>  the 62-65 that I have owned have had rivets in it, believe it was spot
>  welded in, there are holes for rivets , but I have not seen any
>  
>  In a message dated 12/9/2016 8:07:47 P.M. Central Standard Time,
  writes:
>  
>  I have a 65 belvedere that was painted when I bought it. The I D tag
>  was attached to the door jam with 2 chrome shoulder screws. Does any
>  one have a photo that shows how this tag is attached and where I could
>  get the correct rivets to reattach it the way it should be? When I
>  went to register it the DMV checked really close to make sure it
>  wasn't stolen. I had to take the rear package tray out so they could
>  check the number stamped there with the vin. Every thing checked out
>  but I would like to look lit it came from the factory. Thanks.
>  
>  -- 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.