SMALL BLOCK MOPAR 273 318 340 360 ELIMINATOR ALUMINUM INTAKE MANIFOLD

[Herb <zephyr9900@xxxxxxxxxxx>]

Has anyone used one of these?  Sounds like he is saying it will work on a Poly.  With 4 barrel heads?? Anyones thoughts, Gary P?

 

 

 

This auction is for a BRAND NEW aluminum dual plane intake for  340/360 Mopar Engines. This intake has a dual bolt pattern that will fit 1967-2003 including the newer 318/5.2L and 360/5.9L Magnum heads.

This intake will also fit 273 and earlier 318 engines that have 4 barrel heads.

There is no provision for exhaust heated choke or exhaust crossover. Not EGR equipped.

This intake is ideal for everyday to high performance street applications. These intakes are produced from steel molds to reduce core shift.

This intake manifold is for use with square bore style carbs, and has an intake port dimension of 2.16”x1.08”. The manifolds height is 5.5”.

Features:

·       180°  dual plane high rise design for power from 1500 to 6500 RPM

·       Air Gap under plenum for cooler fuel charge

·       Bosses on intake runners can be drilled and tapped for nitrous

·       Square bore flange for the Holley 4150/4160 carburetor

·       Perfect port position - allows customer to customize porting for maximum power

·       Has extra water port at rear of intake

·       All intakes are pressure tested in house to ensure a leak free manifold

·       Recommended intake gasket Felpro 1213

·       Recommended torque is 15-18lb

We’ve been in business for over nine years and are committed to providing excellent products with exceptional service. If you have any questions or problems, we are more than happy to address your concerns. Please feel free to call us at (706) 478-9560 and ask for Heather or Shaun.

 

 

http://www.ebay.com/itm/141345548362?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

 

EBay # 141345548362

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.