Re: Main Stud Count

[George Smith <bt6t4@xxxxxxxxx>]

Windage tray on my RB fits and bolts to every oil oil pan bolt

Sent from my Verizon Wireless 4G LTE DROID

Richard Kinsley <leroar.kinsley058@xxxxxxxxx> wrote:

I have never seen a windage tray that attaches via the oil pan bolts.  The ones I have used have always attached by 1/4-20x1/2   bolts that screw into the tops of special threaded main cap bolts.  My experience has been with a /6, 289 F***, 304 AMC and 318 poly.

Rich Kinsley

On Thu, Mar 27, 2014 at 11:57 AM, JimJablonski <groovinjim@xxxxxxx> wrote:

Hi Bill.

What motor are you working on?  When installing a main girdle on an RB it has eight long and two short studs.  The two short ones go in the rear (near the rear main seal).

Perhaps you bought a main stud kit that came with a windage tray, not for a windage tray?  In other words the kit is to replace all of the main bolts with studs, and in the process add a windage tray.  (This would be as opposed to just adding a windage tray - if that's all you are after, wouldn't it be easier to buy one that attaches via the oil pan bolts?)  I may be misinterpreting your post...

Jim

On Thursday, March 27, 2014 7:19:14 AM UTC-4, TopBanana wrote:

I got my main studs delivered the other day, and I'm trying to figure out how many of each I should have. It's an ARP kit for a windage tray. I thought the tray attached by 4 bolts but I have 7 long bolts and 3 bolts in the kit. I think they f'd up. Thoughts?
Bill M

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.