Re: How to remove rear window trim from 64 B Body

Thanks Steve. I'll try it again, sounds like I just was a little too cautious.

On Tuesday, February 18, 2014 11:03:35 PM UTC-8, MO wrote:

Butch, On my 64 Dodge the rear window trim is held on with small clips that are secured by a small screw. My guess is that you are seeing that small screw. Those screws do not need to be removed to get the trim off. IIRC the trim just snaps over those clips......................MO

{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5

----- Original Message -----

From: Butch

To: 1962to19...@googlegroups.com

Cc: Gary H.

Sent: Tuesday, February 18, 2014 8:00 PM

Subject: Re: How to remove rear window trim from 64 B Body

I see a screw in the bottom corner of the driver's side, but it's hidden pretty well by the window gasket. I'll see if I can remove it once I've soaked it in penetrant./Butch

On Monday, February 17, 2014 10:49:26 AM UTC-8, 62to65mopar wrote:
Does the '64s rear trim have clips for the top pieces and screws for the bottom pieces?

Thanks,
Gary H.

> -------Original Message-------
>
> Hello everyone,
> I'm gamely pushing ahead on the restoration of one of my two 64 Plymouth
> Sport Furys. I have a couple of leaks around the rear window that I need to
> repair, but first I need to get the rear window trim off. I've tried a
> couple of things that have not worked and am concerned that if I
> pry-push-pull any harder, I'll either break the window or ruin the trim. I
> know some of you have this mastered so would really appreciate you telling
> me how to do this. Thanks,
> Butch Edison
> 64 Plymouth Sport Fury (2)
> 37 Plymouth hot rod
> 39 Ford Pickup (my dad's old work truck)

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.