Re: Cam for my 440

[William Cole <wedge64@xxxxxxxxxxx>]

Check for a bad vacuum leak. Could be the cause of fast idle.

Bill

On Mon, Feb 10, 2014, at 03:51 PM, David Blosser wrote:
> Pulling my hair out!
> I have a 440 cross ram in my 62 Belvedere making a clone 413 nostalgia
>  straight axle car. I finally got it running with new Edebrock E Street
> Alum heads and Comp 23-227-4 cam.
> Adv Dur Int 275 Exh 287
> Dur @.050 231 & 237
> Lift .525 .525
> Lobe Sep 110.0
> It runs really strong but will not idle. I was told this was a mild cam
> for
> street and strip. It will not idle at less than 1500 rpm and I have to
> keep
> a foot on the brake and one on the gas when at a stop and in gear. I put
> a
> new 2800 stall converter in it. Do any of these things sound wrong to
> anyone?
> Being a converted mopar nut, I am really lost on how to tune this engine
> and my engine builder is a holley carb guy, so he is no help. I have
> changed the jets and metering rods and springs to no avail.
> I am just digging a hole at this point and need all the help I can get.
> Edelbrock said they could not help either.
> David
> 
> -- 
> David Blosser, Pres.
> PallCon Pallets
> 239-293-4885
> 
> -- 
> -- 
> --
> Please address private email -- email of interest to only one person --
> directly to that person. That is, email your parts/car transactions and
> negotiations, as well as other personal messages, only to the intended
> recipient. Do not just press "reply" and send your email to everyone
> using the general '62-'65 Clubhouse public email address. This practice
> will protect your privacy, reduce the total volume of mail and fine-tune
> the content signal to Mopar topic. Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> -- 
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
> 
> --- 
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit https://groups.google.com/groups/opt_out.


-- 
  William Cole
  wedge64@xxxxxxxxxxx

-- 
http://www.fastmail.fm - Does exactly what it says on the tin

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.