Re: Poly to Big Block swap Question

the coil on th e small block is at the rear and on the 383 it is in front of the carb propably need to add a little

From: Kevin Merkley <krmerkle@xxxxxxxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Thursday, January 26, 2012 9:12 PM
Subject: Poly to Big Block swap Question

Hi folks,

I have been working on the wiring for my wife's 64 Polara 500 ragtop
that originally had a 313 and will have a 383.

My question is: does the coil wire in the engine wiring harness stay
the same or does it get lengthened? I do not have the engine near the
car and do not know where the coil sits on the intake as compared to
the small block.

Thanks for your help.

Regards,

Kevin Merkley
Thunder Bay, Ontario Canada

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.