Re: Torker II vs Performer RPM Intake

Here's a series on intake manifold evaluations by Hot Hod Magazine in 2007 and 2008. Engine is a hopped up 383.

This is Part 1 and used a 383 with stock 906 heads.

http://www.hotrod.com/techarticles/hrdp_0712_mopar_intake_manifold_comparo/

This is part 2 and they changed the heads on the 383 to a set of CNC's Performer RPM Heads

http://www.hotrod.com/techarticles/hrdp_0801_mopar_intake_manifolds/viewall.html

Akron Don Gallimore

From: "furyus63@xxxxxxxxxxx" <furyus63@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Fri, November 25, 2011 11:07:17 PM
Subject: Re: Torker II vs Performer RPM Intake

I believe the Engine Masters test results are included in the several Mopar Muscle articles.

I viewed them at one time. I think if you Google Moper Muscle intake manifold test you should come up with a half dozen or more.

Nick Tiberio

FuryUs63

From: "Don Gallimore" <dongallimore@xxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Friday, November 25, 2011 12:52:00 PM
Subject: Re: Torker II vs Performer RPM Intake

Engine Masters - any idea how I can tap into that resource?

BTW - I do have an Mopar M-1 and the car now runs a Torker II.

Akron Don

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.