Re: 361 Engine suggestions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 361 Engine suggestions



Check your freeze/expansion plugs.  I had 5 good ones and one that
starting pissing anti-freeze as soon as I tapped it.  They make rubber
ones with a nut that screws down that is much easier to get into the
engine while it is in the car.

Check your timing.  Put a lower pressure radiator cap on as your
cooling system is older.

I've heard Pertronix makes a good electronic conversion.



On Nov 11, 8:19 pm, Zachary Ross <zachros...@xxxxxxxxx> wrote:
> Hey guys... just thought i'd throw this out and see what I can learn!  I
> have a 64 dodge 880 custom with a 361... I changed the belts and hoses the
> other day... what would be some good ways to improve the engine and get it
> running the best I can?  I do want to get it rebuilt in the next couple of
> years... but I thought i'd ask and see what I can do in the mean time!
>  Thanks guys!
>
> Zach
> 64 Dodge 880 Custom 4DHT
> 361 Push Button Auto

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.