See I saw stuff like that, but I never saw on in person if it's a trunk lock cover or just a solid emblem. I know mine and urs rotates to show the lock. Idk how that works.
Sent from my iPhone Man I typed everything.... and I look every day for all the little detailed parts.... I found this yesterday...
not sure if you can make that work... or if it would, but thought i'd let you know about it... I'll send you a pic of what I have later... thanks, Zach On Mon, Nov 7, 2011 at 10:33 AM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
Btw, what did you type in search bar? I've typed everything I could imagine
Sent from my iPhone
Hey guys,
Here is a close up pic of the trunk lock emblem.... I found it NOS on eBay awhile back. One of you guys wanted to try and make one or something? Let me know if this works as a reference or not... I tried to scan it but it looked like crap... I'd be happy to sell you the old one when I'm done with it... Not sure if you can get it to look good though... I'll send a pic of it's condition tomorrow! Thanks guys... Zach
On Sat, Nov 5, 2011 at 11:56 AM, Jacob Fox <imfast101@xxxxxxxxx> wrote:
Bribe him for the emblem haha
Sent from my iPhone
There is a four door 64 Dodge 880 for sale at Conroe ,Tx swap meet.
Jimmy
On 11/5/2011 1:43 PM, Jacob Fox wrote:
Hey if u wanna sell me that one when ur ready to paint ill
buy it. I'll resin it with the glass and set it in the cover.
I'm tired of people asking, "hey what went right there?" lol
Sent from my iPhone
Right on, I'll scan it today and send the pic over... I
still have the old one on my car... The emblem inside/under
the glass isn't a picture actually...it's like a plastic
logo that's raised up... I left the glass out but kept it...
I'll find it and send some pictures of that as well.... Talk
to you soon! Zach
Sent from my iPhone
Yea!! That'd be great! Jeff could use the real deal
then! What did you do with the old one that fell out?
Sent from my iPhone
Hey Guys,
I ran into the same problem, I shut my trunk on
my 880 and the glass with the emblem fell out of the
thing.... I thankfully found an NOS one on eBay...I
knew I would probably never see or find another so I
bought it for like 250 or 300 bucks.... It's brand
new and I'm saving it for when I paint the car...
While there is no way I'm parting with it;) I can
scan it emblem face down which will give you a
pretty decent large, legit picture of it if you
would like? Let me know! Zach
Sent from my iPhone
If I had a pic,
I may be able to make one up.
Jeff
On 4-Nov-11, at 8:00 PM, Jacob Fox wrote:
I included the pic of the housing a
few emails ago. The emblem (two dodge
triangle deals next to each other) looks
the same as a 65 dodge coronet (not the
500). I don't have a copy of it but
theres a few on eBay. I found a few
pictures of the 880 emblem on google but
not good pics. If I could get a new
emblem I'd glue/resin it in. I called
lathe parts cars people I know an it
seems that's a common problem that they
fall out. Saturday I have to call a guy
with two 880s has one on one of the 880s
but trying to convince him to sell me
one however is another story
Sent from my iPhone
how about taking the housing
off and laying the new emblem on
it and pouring a clear resin on it
to adhere it to the housing as
well as protecting it
Well the emblem metal
isn't magnetic so it won't
stick. I'd have to apply the
sticker to the metal n I
just don't know how it'll
look. Plus the graphic
designers are lazy they are
giving me flak cause of
design and colors cause they
can only print certain
things on certain vinyl idk.
Friend is a designer and
said there's no prob doing
it but he's in army now.
Sent from my iPhone
Jacob,
If you can get a
acceptable graphic made of
the emblem it could be
glued to any suitably
sized refrigerator type
flexible magnet. Option?
Mike LeFevre
On Nov 4, 2011, Jacob
Fox <imfast101@xxxxxxxxx> wrote:
While
my search continues
for the elusive
emblem, I was wanting
to see if I could get
some ideas on how I
could make one. I know
Gary said something
about a magnet, but
unfortunately its not
a metal I can do that
with. A sticker is to
flat and I don't think
it'd last and look
right. So any ideas to
mess around with? I
thought about using a
coronet emblem cause
they look the same but
unfortunately I got
dimensions on one and
it's an inch to big..
Sent from my iPhone
--
--
Please address private
mail -- mail of
interest to only one
person -- directly to
that person. That is,
send parts/car
transactions and
negotiations as well
as other personal
messages only to the
intended recipient,
not to the Clubhouse
public address. This
practice will protect
your privacy, reduce
the total volume of
mail and fine tune the
content signal to
Mopar topic. Thanks!
1962 to 1965 Mopar
Clubhouse Discussion
Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html
and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this
message because you
are subscribed to the
Google Groups "The
1962 to 1965 Mopar
Mail List Clubhouse"
group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private
mail -- mail of interest
to only one person --
directly to that person.
That is, send parts/car
t
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
<photo-8.JPG>
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
|
Back to the Home of the Forward Look Network