Re: Need 3/8 ????
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need 3/8 ????



Few years ago ran a 69 charger with a six-pack setup.

I had a competition mechanical and a carter electric at the tank.

At the big end of the strip the fuel pressure would drop to zero in the traps.

New 3/8 line front to back took care of the problem.

The charger RTs had a 7 pound mech pump..the holleys did not like that
much pressure a regulator kept it at 4 to 5 pounds to keep from pushing
the float valves off their seats while idling.

rob/ferts/phx


On 10/24/11 6:01 PM, Paul L wrote:
A little late to the parade here but, I'm running stock 5/16" line
with a cheap rebuilt fuel pump and a 780 Holley with no problems.

Paul L.
63 Sport Fury
440/727



--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.