Cast Iron Exhaust Coatings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cast Iron Exhaust Coatings



The discussion on header paints and coatings is interesting.  For
anyone wanting to just clean up stock exhaust for a show try Eastwood.

http://www.eastwood.com/factory-gray-high-temp-coating-kit.html

The next one is more of a quick fix.  It is like a graphite paste that
is rubbed onto the exhaust manifold.  It does not last but is a quick
way to get ready for a show.

http://www.eastwood.com/calyx-manifold-coating.html

Eastwood has a nice catalog and a good selection of restoration
supplies.  If you have your engine out their engine paint is much
better than the rattle-can variety.

http://www.eastwood.com/ew-ceramic-engine-paint-qt-62-71-bb-chry-turqo.html

Dennis C.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.