Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]



Barrett built the engine with his crew and I am a grateful spectator.  We have been friends since he read my articles in Mopar Muscle 2001 and “upped the ante” on his project then to what you see now.
 
Yes, I am hopeful it meets and exceeds our expectations.  You will be amazed at the “stealth” chassis surrounding the Poly.
 
Gary Pavlovich
 
Sent: Wednesday, August 10, 2011 9:35 PM
Subject: Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]
 
I don't know you real well, Gary, but well enough to know that you are THE MAN when it comes to Poly engines.  There was never any doubt in my mind that the engine was extremely well thought out before you even started the project.  I would also bet that you have a pretty good idea what HP and torque the engine will make on the dyno.  I don't blame you for not venturing a guess because anything can happen.  I think that engine is going to shock a lot of people with its power.  I still can't get over just how great that engine looks.  That effing intake is really something!
 
Chick
 
 
----- Original Message -----
Sent: Thursday, August 11, 2011 12:28 AM
Subject: Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]
 
Chick,
 
This is Barrett Lash’s engine and I have been informed along the way as we are friends.  I have my ideas on the HP/Torque and will be present when the engine is dyno’d and tuned; will release more information when I get the nod.
 
Everything was done with much thought, planning, math, and proper machining; the package is as it should be and we await the results.
 
Gary Pavlovich
 
Sent: Wednesday, August 10, 2011 1:21 PM
Subject: Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]
 
Beautiful looking engine.  No one would know it was a Poly engine by looking at it if you didn't tell them what it is.  Most impressive, to say the least.
 
Any idea on the horsepower and torque?  I know you know these engines well enough to make a very educated guess if you haven't dyno'd the engine.
 
A job well done.  I wish I had someone like you helping me with my car.  You know your business.
 
Chick
 
 
----- Original Message -----
Sent: Wednesday, August 10, 2011 4:08 PM
Subject: Re: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]
 
 
Sent: Wednesday, August 10, 2011 12:43 PM
Subject: [318poly] Pro Street & Race Ready 360 Poly Stroker - Barrett Lash [4 Attachments]
 
 
[Attachment(s) from Gary Pavlovich included below]

OK...been a long time coming and we are ready to peak under the tent at the Race-prepped 360 Poly Stroker.  This engine promises to be quite a surprise when it hits the streets in a stealth chassis you will never expect.
 
A Hyd. Roller Cam and Professional Tunnel-Rammed engine where the exterior design and carefully chosen components mirrors the engineering “inside” the motor of Barrett Lash.
 
More to come...
 
Gary Pavlovich
__._,_.___

Attachment(s) from Gary Pavlovich

4 of 4 Photo(s)

Recent Activity:
.

__,_._,___
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.