Re: pb blaster on wiring harness

[PluckedChicken <62pluckedchicken@xxxxxxxxx>]

CRC also makes a product called Electronic Clean.  On another car I
have, I had soaked a stuck heater switch in wd40 to free it up, and
used "electronic clean" to clean up a bit of the oil after it freed up

On Jun 11, 6:36 pm, Eric Sturgis <ericstur...@xxxxxxxxx> wrote:
> Hot water and dawn dish soap?
> On Jun 11, 2011 4:34 PM, "Jimmy Peavy" <peave...@xxxxxxxxxxxxxx> wrote:
>
> > That'll cut it loose but it is hard on some plastics.
> > Dry's out the plastic, and makes it brittle.
>
> > Jimmy
>
> > On 6/11/2011 6:26 PM, 65 wrote:
>
> >> Brake clean?
>
> >> ----- Original Message ----- From: "neal zimmerman" <
>
> neal.zimmer...@xxxxxxxxx>
>
>
>
> >> To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
> >> Sent: Saturday, June 11, 2011 4:15 PM
> >> Subject: pb blaster on wiring harness
>
> >>> OK, I was trying to get an underdash wiring harness out of a parts
> >>> car. I don't think it had ever been removed in 45 years, so the
> >>> connectors were tight and unyielding. I was afraid I was going to
> >>> break them, so I had no choice but to douse each connector with a good
> >>> shot of PB Blaster. It worked, it came out lickety-split, but now I
> >>> have an oily harness that will smell up the car when I install it. So
> >>> NOW I need to remove all that PB blaster. What can I use that wont
> >>> hurt the plastic wirings or connectors?? I know many things that will
> >>> cut the PB blaster, but I am afraid it will hurt the harness. Its a
> >>> really nice harness too and I dont want to damage it in any way
> >>>  neal zimmerman, eugene oregon
>
> >>> --
> >>> You received this message because you are subscribed to the Google
>
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.>>> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> >>> To unsubscribe from this group, send email to
>
> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx>>> For more options, visit this group at
>
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups
>
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> > To unsubscribe from this group, send email to
>
> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx> For more options, visit this group at
>
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
>
>
> - Hide quoted text -
>
> - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.