Torque Converter

[Jay <shelby_nut@xxxxxxxxx>]

Let's try again....

 

   My 64 Windsor (Newport) Convertible originally came with a 361. At sometime in it's life the 361 was replaced with a 1966 383 2bbl engine. Then a weiand 4bbl intake, Holley 750, and headers were added, as well as a cam.

 

   I don't know the specification of the cam, but it is fairly lumpy, in that it has that nice lumpy cam tone out the exhaust when in gear. I have to set the idle at around 1000rpm's, so that in gear it doesn't stall out. 

 

Question is this, when I put it in gear from park, it engages hard and pulls the rpm's down to around 700. Would this hard engagement and large drop in rpms be possible due to some sort of tranny modification (shift kit, line pressure or spring change) or is it more a function of the torque converter?

 

Once again, any insight would be appreciated!

 

Jay

 

 

 

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx

For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.