Re: vagabond big block heads

[Stan Kafouse <skafouse@xxxxxxxxx>]

A 250 head is a 906 head without freeze plugs (actually a place to remove the casting sand) on the ends. These came on early 68 engines. Ive only seen them on 383s.  I parted a 68 car years ago with these heads. 
An open chamber 915 is another way to describe them.
--- On Sun, 4/10/11, Gary H. <62to65mopar@xxxxxxxxxxx> wrote:

> From: Gary H. <62to65mopar@xxxxxxxxxxx>
> Subject: vagabond big block heads
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, April 10, 2011, 7:30 PM
> 
> Can anyone tell me if a pair of 2951250 heads are really a
> one-year-only 
> casting number: they are listed as from a 1968 440 with
> 2.08 intake and 
> 1.74 exhaust (same valves as the 1968-70 906 heads). 
> 
> I'm almost positive these 2951250 heads came off a 1968
> Polara 383 car.
> 
> Thanks,
> Gary H. 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
>