Re: rear door panels 1964 Dodge Polara Hdtp

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

For all your panels, front and back. Get the heaviest Mil plastic sheeting 
you can find and cut it to fit your door and rear panel. . Attach it to the 
metal of the doors with a non hardening strip caulk befor installing your 
door panels. That creates a water barrier in back of your fiber panels 
.......................MO
{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5
----- Original Message ----- 
From: <Blosserde@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, April 01, 2011 12:09 PM
Subject: rear door panels 1964 Dodge Polara Hdtp


> Hi Mopar Gurus.
> I used the good advice everyone gave and the front panels came off like a
> dream. Lubed everything with proper grease and the windows roll up and 
> down
> wonderful.
>
> I however have a problem getting the back panels off.
> Armrests are out.
> Both sections of back seat are out.
> 2 Screws are out
> Clips have been released.
> But there is a catch or a stop when I try to slide the top of the panel 
> out
> from under the Chrome trim near the rear window.
> Do I have to take the Chrome molding off the rear window to get the   rear
> panel out?
> Does anyone recommend how to best apply new plastic or Visqueen to the
> fiber board panel to keep it dry I assume?
>
> As always thanks for the  experienced wisdom.
>
> David
>
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.