tranny swap

[Roger Pettigrew <dodger7998@xxxxxxx>]

I have a friend that is putting a 74  440 in his 65 Belvedere,,,,,, it  
came with a 727 on it but he wants to go with a 4-speed,,,,, as I remember most 
 of the cranks were not drilled for the pilot, but you could get around 
that with  a undersize bushing, does this sound correct, and if so what is the 
undersized  bushing part number or who has them, also he needs a flywheel 
for it, and from  what I am seeing there are several that will fit, but does 
not sound like  balance is the same on all of them, any input would be  
appreciated,,,     Roger

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.