Re: B-body splash shield info

[Donald Gallimore <dongallimore@xxxxxxx>]

My '65s have the mudflap type material on outside of the rail between the k 
frame arms held on by two spring clips, for lack of a better name.  Immediately 
behind the rear k frame arm is a stamped metal half box on both sides under the 
frame held on with two sheet metal screws, maybe hex headed.  I have no doubt 
that these are original

 
Akron Don Gallimore



----- Original Message ----
> From: David Bailey <bb64d440@xxxxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Fri, October 29, 2010 9:21:13 AM
> Subject: RE: B-body splash shield info
> 
> 
> 
> 
> Rich,
> Even though I’m not the person asking about rear inner  fender splash shields, 
>(that aren’t part of the chart) I thank you; I found the  chart to be full of 
>other good info! One thing I gotta ask though, I see the  chart caption states 
>the L & R angled shields situated at the K member  (#2800658 and 9) were pop 
>riveted to the frame and were made of “plastic”? Wow!  I did not know that.  
>Obviously, my car does not have these but someone at  some time took the trouble 
>to make replacements from flat sheet metal. So I must  ask, does anybody’s car 
>still have these original plastic pieces on their  cars??? If any of these 
>survived these years, I’d like to find a pair for my  restoration project car.  
>
> And BTW Rich, I also viewed your pics from Picupine. That is the sweetest 318 
>Poly I’ve ever seen! Nice work! And being  packaged in that sleepy look’ in 4 dr 
>sedan, Wow, gotta love it! 
>
> Thanks!
> Dave B  
> 
> > To: 1962to1965mopars@xxxxxxxxxx
> >  From: rlkinsley@xxxxxxxxx
> > Subject:  B-body splash shield info
> > Date: Thu, 28 Oct 2010 17:25:11 +0000
> > 
> > 
> > I just found a chart I had on B-body splash panels. It might  be helpful 
> > to some here. I'll try the picupine link and see how it  works. There's a 
> > number of stuff in there but the chart is  first.
> > 
> > http://www.picupine.com/61d9636x 
> > 
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> > http://1962to1965mopar.ornocar.org/ml-kinsley64polara.html
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to only  one person -- 
>directly to that person. I.e., send parts/car transactions and  negotiations as 
>well as other personal messages only to the intended recipient,  not to the 
>Clubhouse public address. This practice will protect your privacy,  reduce the 
>total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion  Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
>http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>
> > 
>                             
> --
> [Non-text portions of  this message have been removed]
> 
> 
> ----
> Please address private mail  -- mail of interest to only one person -- directly 
>to that person.  I.e.,  send parts/car transactions and negotiations as well as 
>other personal messages  only to the intended recipient, not to the Clubhouse 
>public address. This  practice will protect your privacy, reduce the total 
>volume of mail and fine  tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar  Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
>http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
>
> --^----------------------------------------------------------------
> This  email was sent to: dongallimore@xxxxxxx
> 
> http://topica.com/u/?bUrDWg.caU2BH.ZG9uZ2Fs
> Or send an  email to: 1962to1965mopars-unsubscribe@xxxxxxxxxx
> 
> For Topica's complete suite of email marketing solutions visit:
> ?p=TEXFOOTER
> --^----------------------------------------------------------------
> 
> 
>