Is the lever different depending on if it's a push button or console shift? The tranny I'm looking into is a push button from a '62 Polara 500. The price is $100. plus a couple hundered miles of driving. It would need to be rebuilt, so it's essentially a core. Maybe I'll pass on it. Thanks, Dave --- On Mon, 9/20/10, Gary H. <spigot2039@xxxxxxxxxxx> wrote: > From: Gary H. <spigot2039@xxxxxxxxxxx> > Subject: Re: '62 Transmission > To: 1962to1965mopars@xxxxxxxxxx > Date: Monday, September 20, 2010, 10:28 PM > > No, I was thinking about the manual lever (also known as > the "roster comb") on the valve body and the filter. > http://www.1962to1965mopar.ornocar.com/transtech.html > gives some background. > > Thanks, > Gary H. > > > -----Original Message----- > > >Gary, > > > >You mean there are tail length differences by body type > (B vs A, etc...) - right? > > > >Dave > > > >--- On Mon, 9/20/10, Gary H. wrote: > > > >> From: Gary H. > >> > >> Yes it will bolt up. > >> > >> No, not all '62-'65 cable shift big block > transmissions are > >> the same. > >> > >> Thanks, > >> Gary H. > >> > >> -----Original Message----- > >> > > >> >Would a '62 727 from a 361 engine bolt right > up to a > >> 440 and into my '64 Belvedere? In other words, > are all > >> '62-'65 cable shift big block transmissions the > same? > >> > > >> >Thanks, > >> > > >> >Dave > >> > > > > ---- > Please address private mail -- mail of interest to only one > person -- directly to that person. I.e., send > parts/car transactions and negotiations as well as other > personal messages only to the intended recipient, not to the > Clubhouse public address. This practice will protect your > privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html and > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. > > >