Re: Hard starting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Hard starting



${top_text_ad}
Tried that.  Pumping 3 times versus 30 before cranking makes zero
difference.  It still takes about 20 seconds of cranking, which is why
I'm buying into the evaporation theory.  Once running, it'll start
instantly like a champ the rest of the day.  The next day, pretty
easy.  Two days, a little harder, and so on.  It also seems like
outside temp makes no difference.  Still starts hard when it's 95
degrees out if it's been sitting.

Can an electric be used in conjunction with mechanical?  Maybe flip on
the electric just to prime it, then turn it off and run off the
mechanical?

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco



On Fri, Sep 17, 2010 at 7:34 AM, doug daniel <dougdaniel50@xxxxxxxxx> wrote:
> pump the pedal several times after a long time sitting
>
> --- On Thu, 9/16/10, Rich Kinsley <rlkinsley@xxxxxxxxx> wrote:
>
>> From: Rich Kinsley <rlkinsley@xxxxxxxxx>
>> Subject: RE: Hard starting
>> To: 1962to1965mopars@xxxxxxxxxx
>> Date: Thursday, September 16, 2010, 10:14 PM
>>
>> I had that issue and the electric fuel pump cured it for
>> me.
>>
>> Rich Knsley '64 Dodge Polara 4dr 318poly w/goodies
>> ==================================================================
>> Jim Altemose wrote:
>> >
>> > My 63 Polara 500, 383, 4 barrel Carter AFB, has
>> trouble starting when
>> > it sits for several days.  It always goes
>> eventually but takes 20 or
>> > 30 seconds of cranking.  A little research (see
>> link below) suggests
>> > that modern gas evaporates quickly and the carburetor
>> bowl evaporates
>> > through the bowl vent.  They suggest priming the
>> bowl through the vent
>> > with an eye dropper.  Does this make sense?
>> Is there any kind of gas
>> > additive that would help prevent evaporation?
>> >
>> > http://www.thecarburetorshop.com/Troubleshooting.htm
>> >
>> > As always, thanks.
>> >
>> > - Jim
>> > Jim Altemose, Long Island, NY
>> > '63 Polara 500 (Max Wedge)
>> > '63 Polara 500 (383)
>> > '65 Belvedere I (Street Wedge)
>> > '71 Bronco
>>
>>
>>
>> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>>
>>
>> ----
>> Please address private mail -- mail of interest to only one
>> person -- directly to that person.  I.e., send
>> parts/car transactions and negotiations as well as other
>> personal messages only to the intended recipient, not to the
>> Clubhouse public address. This practice will protect your
>> privacy, reduce the total volume of mail and fine tune the
>> content signal to Mopar topic.  Thanks!
>>
>> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html and
>> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>>
>>
>>
>
>
>
>

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.