Re: Steel Wheels needed

[Jack Cheek <jcheek@xxxxxxxxxxxxx>]

yes 
the center seems smaller  i have seen people take a dermel tool and cut the center out(risky bussiness doing that)if it isnt done right and then they are put on ------and it wasnt cut enough puts to much perrsure on the lug bolts and they pop off(sounds like some one shooting .22 rifle>
so i wouldnt go that route my self.
thanks jack
----- Original Message -----
From: "Gary H." <spigot2039@xxxxxxxxxxx>
Date: Sunday, September 12, 2010 18:23
Subject: Re: Steel Wheels needed
To: 1962to1965mopars@xxxxxxxxxx

> 
> 
> Doesn't the Ford wheel have a smaller center hub than a Mopar? 
> Thus it does not fit fully flush against the drum? 
> 
> Thanks,
> Gary H.  
> 
> -----Original Message-----
> >
> >Jeff,
> > 
> > I have found it difficult to find steel wheels for any 
> Mopar.   What I did 
> >was, I found steel wheels for a Ford as they are 
> interchangeable with  
> >Mopar.  Try a junk yard.  I only needed one and got 
> it for $15.   Good luck.
> > 
> >Dayv
> >
> >-- 
> 
> 
> ----
> Please address private mail -- mail of interest to only one 
> person -- directly to that person.  I.e., send parts/car 
> transactions and negotiations as well as other personal messages 
> only to the intended recipient, not to the Clubhouse public 
> address. This practice will protect your privacy, reduce the 
> total volume of mail and fine tune the content signal to Mopar 
> topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> --
> 
> 

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.