I think you just have to cut those off. Be careful though as I reached in and hurriedly cut the ty-raps off a fan I had put on mine. The water that began squirting out was not a good thing :-( Then I bought my new aluminum radiator. I'm sure you could reattach it later. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ===================================================================== W.A. Edison wrote: > > I'm putting one of my 64 Sport Furys back to stock as far as the cooling > system goes, so would like to remove the electric fan. How do I > disengage it from the radiator? It looks like there are some kind of > plastic tabs about 1"x3/4" on the front of the radiator in 5 places, > with pins that go through the fins. I don't see where they unscrew or > pop off. Any advice is appreciated. Oh yeah, if my stock cooling system > doesn't pan out, can I reattach the fan? Thanks all. Be nice to mommy! > /Butch > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.