Re: Intake manifold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Intake manifold



While we are on this subject; Just how much taller is an RB block compared to a Low Deck?

Bill Harrison 65 Coronet 2 dr post

--- On Wed, 2/3/10, Stevan Miner <miner@xxxxxxxxxxx> wrote:

> From: Stevan Miner <miner@xxxxxxxxxxx>
> Subject: Re: Intake manifold
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, February 3, 2010, 7:08 PM
> 
> Hi Dave,
> The intake manifold for a 383 or 400 will fit your 361 just
> fine as they are all considered LB engines. One from a 413,
> 426W or a 440 will not fit. They are RB engines.
> Stevan Miner
> Miner Auto Service
> Winnebago, MN
> 
> --------------------------------------------------
> From: "Dave Isle" <mnwildpunk@xxxxxxxxx>
> Sent: Wednesday, February 03, 2010 9:59 AM
> To: "62-65 mopars 62to65mopars" <1962to1965mopars@xxxxxxxxxx>
> Subject: Intake manifold
> 
> > 
> > Hey everybody I've been online looking for a 361 4BBL
> Intake manifold I have found a lot of them for later 383 but
> I don't know if they will work for my chrysler most of them
> look like they have a slightly different look
> > Sent via BlackBerry by AT&T
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person --  directly to that person. 
> I.e., send parts/car transactions and negotiations as well
> as other personal messages only to the intended recipient,
> not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and
> fine tune the content signal to Mopar topic.  Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
>



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.