Steve,
You sound busy and productive.
I have finished my Poly Tunnel Ram and presently working on finishing
the
Poly Roller Camshaft as well as the Poly Roller Rocker setup.
Gary Pavlovich
----- Original Message -----
From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, January 29, 2010 12:21 AM
Subject: projects in progress
>
> I see a lot of list members on here this winter. What are you all
> working
> on this off season? Any drag racers getting ready for opening day at
> the
> strip?
> I have been doing a little on my 64 Dodge 440. Accumulating some more
> parts-researching disc brake swap. Removed the heater assembly- clutch
> and
> brake pedal assembly- . next will be the wiper motor and linkage and
> the
>
> instrument cluster face plate for restoring.. I have a few rust
> throughs
>
> in the air plenum for the heater to patch and try to coat inside plenum
> with rust encapsulator. This coming week I want to repair a couple
> holes
> in the floor and weld in a four speed tunnel hump. And I think I will
> order the bracket and adapters for the front disc brakes. I want to
> talk
> to a leaf spring manufacturer in Omaha to see if he can make me up a
> set
>
> of heavy duty rear springs or maybe even SS springs if he can get the
> specs. Warmer weather and sunshine will be here SOMETIME---I
> promise!.........................................MO
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person. I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
>
>
>