Re: projects in progress

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Steve,

You sound busy and productive.

I have finished my Poly Tunnel Ram and presently working on finishing the 
Poly Roller Camshaft as well as the Poly Roller Rocker setup.

Gary Pavlovich
----- Original Message ----- 
From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, January 29, 2010 12:21 AM
Subject: projects in progress


> I see a lot of list members on here this winter.  What are you all working 
> on this off season?  Any drag racers  getting ready for opening day at the 
> strip?
> I have been doing a little on my 64 Dodge 440.  Accumulating  some more 
> parts-researching disc brake swap. Removed the heater assembly- clutch and 
> brake pedal assembly- . next will be the wiper motor and linkage and the 
> instrument cluster face plate for restoring.. I have a few rust throughs 
> in the air plenum for the heater to patch and try to coat inside plenum 
> with rust encapsulator.  This coming week I want to repair a couple holes 
> in the floor and weld in a four speed tunnel hump. And I think I will 
> order the bracket and adapters for the front disc brakes.  I want to talk 
> to a leaf spring manufacturer in Omaha to see if he can make me up a set 
> of heavy duty rear springs or maybe even SS springs if he can get the 
> specs. Warmer weather and sunshine will be here SOMETIME---I 
> promise!.........................................MO
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.