RE: racer brown cam

["Gary H." <62to65mopar@xxxxxxxxxxx>]

I'm not sure they have a Web site. You can call Jim. His phone number is 
on http://1962to1965mopar.ornocar.com/restoration-sources.html as well 
as a link:  4secondsflat that sells some of his stuff.

Thanks,
Gary H. 

-----Original Message-----
 
>I need help. I am building a 383 into a stroker and want to use a Racer 
>Brown Cam but can't find their web site to get their feed back on what 
>cam to run.
>It is being bored out 60 thousandths and I am using Howards forged 
>aluminum 6.35 rods with forged trw pistons.
>The crank will be from a 440 with the rod journals turned to chebby 
>specs to accept the Howards rods.
>Any help finding Racer Browns site or if any one knows which cam works 
>best with this engine I would appreciate any input.
>BTW it will also be solid roller lifters and roller rockers.
>I am planning on putting this motor in a tube chassis with a Stratus or 
>Cirrus body.
>Can anybody say Camaro Killer!!!!!!
>
>Thanks
>Bill Harrison
>
> 
 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.