RE: Small holes in floor and trunk

[Jeff Adams <ledman_70@xxxxxxxxxxx>]

I have also heard of painting a heavy coat of POR15 on the floor if the 
holes are small enough.

Ollie wrote:
> 
> Mo,
> I have used alot of fiberglass to patch floors like that and never have 
> had 
> a problem. Make sure the area is really cleaned up good and roughed up 
> with 
> grinder marks.
> My 2 cents.
> Ollie
> ----- Original Message ----- 
> From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, November 10, 2009 7:56 PM
> Subject: Small holes in floor and trunk
> 
> 
> >
> > My Dodge has several holes  ( 1/8" and under)  im the floor and the 
> > trunk 
> > floor.. The surrounding metal is probably rather thin, but not bad 
> > enough 
> > to weld in patches.  In the past, I have coated these  areas  with 
> > fiberglass woven cloth and resin. But since fiberglass and metal expands 
> > 
> > and contracts at different rates, the patches sometimes loosen up.. 
> > Anyone 
> > have a different way to seal up these holes and strengthen the thin 
> > areas 
> > without welding?  Thanks for any input....................MO
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >
> > 
> 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.