RE: "Engine Turned" pattern in side trim
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: "Engine Turned" pattern in side trim



I have some questions about this thread.  I am currently in the process 
of polishing all the trim on my car before re-installing it.  On my 63 
the "engine turned trim" is stainless, not aluminum as has been 
indicated somewhere along this thread.  So being stainless I'm assuming 
that it is not anodized.  
To clean mine up I just laid it out on a flat surface and used a 
"cleaner/degreaser" and some terry cloth to get the gunk off and 
finished by going over it w/ a microfiber cloth.  On the back side it 
had some transferred rust from sitting against the sheetmetal and I used 
steel wool to remove that.
I've been using a 2 step process on a cotton buffing wheel on the rest 
of the stainless and while it doesn't get it to show quality it 
definitely makes it much shinier.  What should I do to maintain this?  
Just a little paste wax?

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html

Douglas Sutherland wrote:
> 
> 
> 
> Does this pattern in a '64 Sport Fury's trim disappear when the old 
> anodizing is stripped off?
> My refinisher won't touch it with a buffer because it is so fragile -- 
> but will the stripping process ruin it anyway?
> If so, did anyone find the vendor for the engine turned decal?
> Thanks,Doug 		 	   		  
> _________________________________________________________________
> Windows 7: It works the way you want. Learn more.
> http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_evergreen2:102009
> 
> --
> [Non-text portions of this message have been removed]
> 



Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.